FEATURES:

SinTek™ Active PFC: Increases voltage stabilization and power supply efficiencies.

DUAL FAN CONTROL KNOB: Take control of your power supply’s fans! Whether you want extreme silence or all out high RPM performance, SinTek™ gives you that choice! SinTek Power Supplies also 'actively' regulates its fan speed. If the user places the fan control knob to ultra silent, lowering the fan speed - The SinTek Power Supply will increase the fan speed just enough to maintain its stability, while being quiet.

SinTek™ MODULAR CABLING: SinTek™ gives you the power to connect only what you need! Each cable was created specifically for SinTek™ Power Supplies, you get extreme voltage for all your computing needs.

SinTek™ VOLTAGE KNOBS: The SinTek SLI™ Series comes complete with PCI Express Overclocking ability as well as Memory Overclocking knobs for the most demanding computer gaming systems! No need to purchase expensive overclocking equipment to get the best out of your system. Our voltage knobs have a 5% regulation in which the voltage can be raised or lowered within an estimated 5%, keeping your computer components safe within its boundary. Its also includes over voltage protection and under voltage protection features.

SinTek™ TEMPERATURE LCD DISPLAY: Every SinTek SLI™ Series Power Supply gives you the ability of viewing your power supplies temperature which allows you to view the cooling performance of your power supply.

SinTek™ DUAL PCI EXPRESS CABLES: Every SinTek SLI Series Power Supply comes equipped with 2 PCI-E cables! Giving you every advantage of today’s technology.

SinTek™ SERIAL ATA CABLES (SATA): Our power supply gives you an unprecedented 6 SATA connections! The SinTek SLI Series Power Supply is ready for the most demanding RAID System.

SinTek™ MOLEX CONNECTIONS: We give you the ability to expand beyond your wildest dreams! By giving you the ability to connect up to 6 peripherals!

SinTek™ 24/20 PIN BTX/ATX POWER: Why deal with ugly 24pin or 20pin adapters that get in the way? Our power supplies come equipped with a SinTek 24/20 pin connection that can transform from 24pin to 20pin on the fly!

***ALL POWER SUPPLIES ARE INTEL/AMD READY.
***ALL POWER SUPPLIES ARE MOTHERBOARD 2.0 COMPLIANT.

TECHNICAL INFORMATION:
Input Voltage: AC Input 100V-240V ±10%
Frequency: 60Hz
In Rush Current: 40A @ 110V, 80A @ 220V
Regulation: +/- 5% on all Voltage Lines
MTBF: 100,000Hours
Warranty: 5 Year Limited Warranty

HOLD-UP TIME:
20msec (min.) at full load. AC input 115V/230V, 57Hz/47Hz

LOAD TRANSIENT RESPONSE:
Step load changes of up to 20% of full load, while other loads remains constant within the rating. The load waveform shall be a square wave with the slope of the rise and fall at A/C and the frequency shall be from 10Hz to 1 kHz. The DC output voltage will stay within regulation during the step load changes.

OVERSHOOT:
During power supply start-up, the output voltages shall be less than 10% of the nominal output voltage. Example, the +5V shall not exceed +5.5V.

PROTECTION:
If the power supply is latched into shutdown stage due to protection circuit activity, the power supply shall return to normal operation only after the fault has been removed and reset PS-ON for a minimum of 1 second. Then it will turn on again.

OVER VOLTAGE PROTECTION:

SHORT CIRCUIT PROTECTION:
Short circuit protection is used to protect the components and the power supply, if a short circuit happens on a component the current goes to ground.

UNDER VOLTAGE PROTECTION:

OVER TEMPERATURE:
The power supply includes an over-temperature protection sensor, which can shutdown the power supply at 110°C. Such an overheated condition is typically the result of internal current overloading or a cooling fan failure.

OVER LOAD PROTECTION:
Overload currents to output rail will cause the output trip before they reach or exceed 110% ~ 160% for protection, the overload currents should be ramped at a minimum rate of 10 A/s starting from full load.