OCZ DDR2 PC2-6400 FlexXLC 2x1GB Dual Channel Kit

Introduction:

A few weeks back, I had the pleasure of working OCZ's PC2-9200 Flex XLC Dual Channel 2x1GB Kit. This is currently one of the rare kits on the market that are able to top 1250MHz when overclocked. Under stock settings, the memory operates at 1150MHz with 5-5-5 timings using 2.35 volts. The PC2-9200s aren't the most power hungry modules, but they do tend to heat up just a bit under maximum frequencies. Water cooled didn't prove to be very beneficial in terms of overclocking or stability, but it did drop the temperatures down about 15 C at full load.

None the less, the kit carried the E6600 test system memory benchmarks in to the 8000 MB/s realm with completely flawless stability. It also happens to be one the current favorites among overclockers from all over. Getting anything above these frequencies has become a challenge in terms of heat and cost which are affecting any future designs. There are still a much, much larger number of people buying memory that is still in the 800MHz range for upgrades and in brand new systems. Do not fret though, as there will most certainly be something even faster from OCZ in the future.

In the meantime, OCZ still has some pretty slick memory kits out there. Among the many Platinum XTC kits, you can occasionally find the PC2-9200 Flex kits. Not everyone can afford those modules but would like something similar. Thus, OCZ decided to release the PC2-6400 Flex XLC Edition Dual Channel 2x1GB Kit for those very people. The modules are similar, but come with 800MHz SPD operating at 4-4-4 timings. Read on and see how they compare in performance and stability.


Specifications and Features:

OCZ DDR2 PC2-6400 CL 4 FLexXLC Edition

• 800MHz DDR2

• CL 4-4-4-15

• (CAS-TRCD-TRP-TRAS)

• Available in 2GB (2x1024) Dual Channel Kits

• Unbuffered 

• OCZ Lifetime Warranty

• 2.0 Volts

• 240 Pin DIMM

• 2 x 1/4" ID (inner diameter) barbs

Special Features

• FlexXLC Heatsink*

• 2.2V EVP**

Part Numbers

2GB (2x1024) D/C Kit PN - OCZ2FX800C42GK  

OCZ DDR2 PC2-6400 / 800 MHz / CL 4 / FlexXLC Edition / Dual Channel The PC2-6400 Flex modules feature the new OCZ FlexXLC (Xtreme Liquid Convention) heatsink that delivers superior heat dissipation via a hybrid copper and aluminm design alterable between passive air or water cooling. The PC2-6400 FlexXLC modules are optimized for the latest cutting edge platforms and will be available in 2GB (2x1024MB) dual channel kits. As part of OCZ’s line-up of premium memory, the PC2-6400 series is backed by a Lifetime Warranty and industry-leading technical support. Harnessing the performance of high speeds, tight timings, and leading-edge heat dissipation the unparalleled design of the OCZ PC2-6400 Flex XLC is a complete, all-encompassing solution certain to set a new standard for recreational enthusiasts. click image to enlarge * The new OCZ FlexXLC (Xtreme Liquid Convention) heatsink delivers superior heat dissipation via the integrated hybrid copper and aluminum liquid injection system. The FlexXLC module was engineered with this unique “flexible” design to give enthusiasts the unparalleled option to run the modules passively or water cooled. The concurrent use of both technologies (water-cooling) promotes maximum heat dissipation and pushes thermal management of memory modules one step further to keep up with the ever-increasing frequency demands. FlexXLC modules seamlessly co-migrate with any system upgrade to liquid cooling. **OCZ EVP (Extended Voltage Protection) is a feature that allows performance enthusiasts to use a VDIMM of 2.2V ± 5% without invalidating their OCZ Lifetime Warranty.