Virtual-Hideout | Kingwin Heat-Pipe Direct Touch CPU Coolers Review

Best viewed @ 1024 x 768 and higher

Kingwin Heat-Pipe Direct Touch CPU Coolers Review

Date Published:
04-03-2008

Written By:
Sludge

Edited By:
Diceman

Provided By:
Kingwin

Where to Buy:
Kingwin

Discuss Article:
VH Forum link

Pages: 1 2

Kingwin Heat-Pipe Direct Touch CPU Coolers

Introduction:

Coming up in this review I will be going over a couple of CPU coolers from Kingwin. These two coolers are from the H.D.T. series and put a new spin on CPU cooling. H.D.T. stands for Heat-pipe Direct Touch, which means the heat-pipes make physical contact with the CPU directly. Does this new type of design make cooling a CPU more efficient or will the older style prove to still be better?

The Revolution RVT-12025 H.D.T. CPU cooler is a tower style, made to stand vertically so that it fits in most standard cases. The RVT-12025D, on the other hand, is a lower profile design that can fit into smaller enclosures. With that said, let's go on to the review and compare the two coolers.

About the Company:

Kingwin was founded in 1992 as a manufacturer specialized in designing and manufacturing CPU Coolers and Mobile racks, also with goals to provide our customers with the best thermal cooling and storage solutions.

Kingwin's office was established in Walnut, CA in 1994 and in 1997 Kingwin has further expanded its branch and established another office in New Jersey for better service to more customers through out the US. We have been producing top quality thermal solutions and storage products both OEM and ODM to support our clients from the worldwide market. Backed by in-depth experiences from market demand and customer responses, we continue to develop new products with innovative ideas to keep up with the pace in the fast changing market. Also, the good relations and services that we provide for our customers is giving us more opportunity to understand, communicate and assist with our clients the best way we can. Our strong support from R&D department is committed to offer the most enhance and cutting edge thermal and storage solution for both industrial and personal computers.

Specifications:

RVT-12025

Intel: Socket 775 CPU, Core 2 Extreme/Quad/Duo, Pentium Extreme Edition/D, Celeron D.
AMD: Socket AM2/754/939/940 CPU, Athlon 64/FX/X2, Opteron, Sempron.
Heat-pipe Direct Touch Technology (H.D.T.) Technology.
Air-Flow Spoiler.
Anti-Vibration Rubber.
3 pcs High Performance U Type Heat-Pipe Direct Touch w/ CPU.
Light Weight.
High Performance & Easy Installation.
120 mm High Efficient PWM Fan.
3 in 1 Application: LGA775 push-pin/K8 & AM2 Tool-Less Clip.
Fan speed: 800~1500 RPM
Fan size: 4.73"(L) x 4.73(L) x 0.98"(W)/120(L) x 120(H) x 25(W) mm PWM Fan
Bearing type: Rifle bearing
Noise level: 20~32 dBA
Max air flow: 72.1~99.6 CFM
Heatsink dimension: 120 x 50 x 159 mm
Heatsink material: Aluminum w/ copper base
Weight: 1.32Lbs / 600 g (w/fan)
Rated voltage: 12 VDC
Thermal resistance: 0.16 C/W
Life expectancy: 50,000 hrs
Connector: 4 Pin with PWM

RVT-12025D

Intel: Socket 775 CPU, Core 2 Extreme/Quad/Duo, Pentium Extreme Edition/D, Celeron D.
AMD: Socket AM2/754/939/940 CPU, Athlon 64/FX/X2, Opteron, Sempron.
Heat-pipe Direct Touch Technology (H.D.T.) Technology.
Particular raised-point on heatsink fin design.
Anti-Vibration Rubber.
4 pcs High Performance U Type Heat-Pipe Direct Touch w/ CPU.
Light Weight.
High Performance & Easy Installation.
120 mm High Efficient PWM Fan.
3 in 1 Application: LGA775 push-pin/K8 & AM2 Tool-Less Clip.
Fan speed: 800~1500 RPM
Fan size: 4.72" x 4.72 x 1" / 120 x 120 x 25 mm PWM Fan
Bearing type: Rifle bearing
Noise level: 19.6~32.4 dBA
Max air flow: 65.1~81.3 CFM
Heatsink dimension: 5.7" (L)x 5.9"(H) x5.07"(W) / 145(L) x 150(H) x 129(W) mm
Heatsink material: Aluminum w/ copper base
Weight: 1.4 Lbs / 663 g (w/fan)
Rated voltage: 12 VDC
Thermal resistance: 0.15 C/W
Life expectancy: 50,000 hrs
Connector: 4 Pin with PWM

<< Back to VH FrontPage | A Closer Look >>

Got News? Send 'em in!